VM7824 / VM8824
4-Port True 4K HDMI Input Board / Output Board Quick Start Guide
Hardware Review
VM7824 Panel View
1. Link LEDs
2. ATEN LockPro™ Screws
3. Status LED
4. HDMI Input Ports
5. Audio Input Ports
VM8824 Panel View
1. Link LEDs
2. ATEN LockPro™ Screws
3. Status LED
4. HDMI Output Ports
5. Audio Output Ports
Hardware Setup
I/O Board Installation
Follow the steps below to safely install the VM7824 / VM8824 to a supporting
Modular Matrix Switch. For a list of the supported Modular Matrix Switch, visit
the VM7824/VM8824 product web pages.
Note:
The VM3250 is used as an example in the instructions below.
1. Power off the Modular Matrix Switch.
Note:
The VM7824/VM8824 cards are hot-swappable.
2. On the rear of the Modular Matrix Switch, unscrew the Phillips head screws
for one input slot (right) and one output slot (left), and then remove back
panel covers.
3. Slide the VM7824 into the input board slot, and the VM8824 into the output
slot. Make sure they secure in place.
4. Tighten the screws to secure the input and output boards to the
Modular Matrix Switch.
5. To install more I/O boards, repeat steps 2 to 4.
6. Proceed to the next section to install sources and displays.
VM7824 Front View
VM8824 Front View
1 2
4
5
1 2
4
5
1 2
4
5
1 2
4
5
3
3
1 2
4
5
1 2
4
5
1 2
4
5
1 2
4
5
3
1 2
4
5
1 2
4
5
1 2
4
5
1 2
4
5
Output Slots
Input Slots
Package Contents
1 VM7824 4-Port True 4K HDMI Input Board or VM8824 4-Port True 4K HDMI Output Board
4 Terminal Blocks
1 User Instructions
VM7824
VM8824