ATEN VM5808H, Руководство пользователя

Страница: 71 / 88

61
Chapter 5
RS-232 Commands
Serial Control Protocol Commands
The VM5808H’s built-in bi-directional RS-232 serial interface allows system
control through a high-end controller or PC.
Configuring the Serial Port
The controller’s serial port should be configured as follows:
Switch Port Commands
The formula for Switch commands is as follows:
Switch C Input C Port Output
C Port Control [Enter]
1. For example, to switch input port 02 to output port 05, type the following:
sw i02 o05 [Enter]
2. To switch output port 04 to the next port, input the following:
sw o04 + [Enter]
3. To turn off video output on port 03, type the following:
sw o03 off [Enter]
Baud Rate 19200
Data Bits 8
Parity None
Stop Bits 1
Flow Control None