ATEN VM5808H, Руководство пользователя

Страница: 39 / 88

Chapter 3. Front Panel Configuration
29
Profile Pushbutton
The PROFILE pushbutton lets users conveniently switch between connection
profiles that have been saved or added to the Profile List (see Profile , page 52).
If a Profile is in use, its profile number (P1–P32) is shown on the lower right
corner of the LCD display.
The Profile pushbutton functions as follows:
Š
Press the Profile pushbutton for 1–2 seconds to cycle between profiles
stored in the GUI’s Profile List (from 1 up to 32, depending on how many
are added to the list)
Š
Alternatively, after pressing the Profile pushbutton (lights), use the Input/
Output pushbuttons to switch to a specific profile (from P1 to P16 only).
Note that:
Š
Input ports 1–8 correspond to Profile P1 to P8
Š
Output ports 1–8 correspond to Profile P9 to P16 (where Output Port
1=Profile 9, Output Port 2=Profile 10... Output Port 8=Profile 16)
The selected pushbutton lights steady, and the VM5808H immediately
applies the port connections configured in the selected profile.
Š
When the Profile pushbutton is pressed for 3 seconds or more, the LCD
directs to the Save to a Profile page (see
Save to a Profile , page 28)
Press the Cancel pushbutton to turn off the Profile LED
Note: If there are no profiles configured on the VM5808H device, an error
message “
No Profile List defined. Profile List can be edited via the Web
GUI ” is displayed when the Profile pushbutton is pressed.
A Profile’s port connections can be edited using the front panel pushbuttons
(see
Port Switching , page 15) or via the Connections page of the Browser GUI
(see Main Page , page 34). Additionally, the Profile List can be configured via
the Profile page of the Browser GUI (see Profile , page 52).
INPUT 1 2 5 5 1 1 3 4
OUTPUT 1 2 3 4 5 6 7 8
P1