ATEN VM5808H, Руководство пользователя

Страница: 25 / 88

Chapter 3. Front Panel Configuration
15
Main Screen
The Main Screen shows the Input ports in the top row, which are tied to the
Output ports shown in sequential order (1–8) at the bottom row.
Š
The front panel pushbutton label (1–8) corresponds to the Input ports and
Output ports on the unit’s rear panel.
Š
Use the Menu pushbutton to view the LCD Menu (see LCD Menu
Organization , page 19).
Š
Use the Profile pushbutton to switch between profile connections (see
Profile , page 52).
Port Switching
From the Main Screen, users can configure the Input-to-Output port
connections to associate an Input source device to an Output display.
Input Port Selection
Use the Input Port pushbuttons to select the Input port you want to configure.
To select which input source displays on each output port, do the following:
1. Press any Input port pushbutton (1–8). The Output port LED(s) tied to the
said Input port light(s) up (steady).
In the example below, pressing Input port 1 shows it is tied to Output ports
1 and 2 .
(Continues on next page.)
INPUT 1 2 5 5 1 1 3 4
OUTPUT 1 2 3 4 5 6 7 8
P1
INPUT 1 2 5 5 1 1 3 4
OUTPUT 1 2 3 4 5 6 7 8