ATEN VM5404H, Руководство пользователя

Страница: 124 / 127

VM5404H / VM5808H User Manual
112
Telnet Operation
To connect to VM5404H / VM5808H via Telnet, follow the steps in
Connecting to the Matrix Switch via Telnet , page 87.
Configuration Menu
Once a Telnet connection to the VM5404H / VM5808H is established, the
device’s text-based Configuration Menu comes up, with the following items:
1. H – Call up the command list for help
Command list:
GT – Set gateway address
IM – Set IP subnet mask
IP – Set IP address
LO – Load connections from profile nn
PW – Change password
RI– Read what input is connected to nn output
RO – Read what output is connected to nn input
SB – Set the serial port baud rate
SS – Switch input to specified port
SV – Save the current connections into profile nn
TI – Set timeout
VR – Software version information
Ctrl-Q – Quit
2. GT – Set gateway address
GT
Old gateway address: 192.168.0.1
New gateway address:
3. IM – Set IP subnet mask
IM
Old IP subnet mask: 255.255.255.0