ATEN VM1616T, Руководство пользователя

Страница: 59 / 70

Chapter 5. RS-232 Commands
49
Note: 1. Each command string can be separated with a space.
2. Some command strings can be skipped, and the default value will be
used.
3. The Audio or Video command string can be skipped, and both values
will be used.
4. If the command setting applies to all devices, the devices do not reply
in order to prevent RX interference.
5. When sending commands without an address parameter, the default
address used is a00; in addition, the a00 device replies (ACK) while
other devices (i.e., a01 a02...) do not reply.
Mute Commands
The formulas for Mute commands are as follows:
1. Mute C Output C Port A Device
C [Enter]
For example, to mute output port 05 on device 01, type the following:
mute o05 a01 on [Enter]
2. Mute C Output C Port A Device
C [Enter]
For example, turn on audio at output port 05 on device 01, type the following:
mute o05 a01 off [Enter]
Enter Description
[Enter] Enter and send out the command
Acknowledge Description
Command OK Command is correct and the function
is executed
Command Incorrect Unavailable command or parameters