ATEN VM1616T, Руководство пользователя

Страница: 29 / 70

Chapter 3. Local Operation
19
Video In Selection
To select which input source displays on each output port, do the following:
1. Use the Out dial and turn it clockwise (right) or counterclockwise (left) to
select an input port.
2. When the cursor is on your selected input port, use the In dial and turn it
clockwise (ascending from 1, 2 .... 16, NA) or counterclockwise
(descending from 1, NA, 16 .... 2) to cycle through the available input
sources.
Options are Ports 1–16 and NA (none).
3. Press In/Out/Enter to confirm your selection. The audio, video, and RS-
232 signals from the selected input port are now tied to the selected output
port.
4. Repeat steps 1–3 for all required ports.
Note: 1. This operation ties all three signals (audio, video, serial) from a
selected input to a selected output.
2. If you did not make any changes, press ESC pushbutton to return
to the Main Screen.
OUTPUT 01 02 03 04 05 06 07 08
INPUT 02 02 05 05 01 01 03 04