Chapter 4. Browser Operation
65
Telnet Operation
The VM0404HB / VM0808HB can be operated and configured via a remote
terminal session using Telnet.
To log into the VM0404HB / VM0808HB by means of a Telnet session, do the
following:
1. On your computer, open a terminal (command line) session.
2. At the prompt, key in the VM0404HB / VM0808HB’s IP address in the
following way:
telnet [IP address]:23
3. Press
Enter
. The login screen appears. At the login prompt, provide your
Username and Password.
Note:
If a user logs on using a Username that is already in session, the newest
login takes effect and the previous session is replaced.
Configuration Menu
Once a Telnet connection to the VM0404HB / VM0808HB is established, the
device’s text-based Configuration Menu comes up, with the following items:
1. H – Call up the command list for help
Command list:
IP – Set IP address
LO – Load connections from profile
nn
PW – Change password
RI– Read what input is connected to
nn
output
RO – Read what output is connected to
nn
input
SB – Set the serial port baud rate
SS – Switch input to specified port
SV – Save the current connections into profile
nn
TI – Set timeout
VR – Software version information
Ctrl-Q – Quit
