ATEN VK1100, Руководство пользователя

Страница: 120 / 176

ATEN Control System User Manual
110
To create a monitor for a device port with a Condition that initiates an Action ,
click
+
from the Library’s Monitor tab, and do the following:
To create an IF Monitor:
1. Select IF from the drop-down menu and enter a name for the monitor.
2. Use the drop-down menu to set the Query Frequency .
3. Use the All Conditions / Any Conditions drop-down menu to select:
These options are only for advanced setups that require multiple
events from hardware devices connected to multiple conditions.
Most devices only require one signal Status added to the
Condition
List to initiate an Action . Most installations will not need to use this
option, therefore it can be ignored.
All Conditions : Add multiple conditions – all of which must be met
for the Action to initiate.
Any Conditions : Add multiple conditions – one of which must be
met for the Action to initiate.
4. Under Device , select a Controller from the drop-down menu, and then
choose one of the following monitor types
Listen to port – to create a monitor that actively listens for a message
from the device. Under Status , double-click a device port to add it to
the Condition list.
Query port – to create a monitor that sends out a command to the
device until a feedback message is received from the device.