ATEN VE814A, Руководство пользователя

Страница: 14 / 29

Chapter 2. Hardware Setup
6
VE814AT Rear View
VE814AR Front View
No. Component Description
1 HDMI Out Connects to the HDMI In port on the display device.
2 HDBaseT Long Reach
Mode Switch Put the switch to
ON
to enable the Long Reach
Mode to transmit HDMI signals up to 150m, at
1080p. For details, see
Long Reach Mode
, page 13.
3 Firmware Upgrade Switch This function is reserved for ATEN Technical
Support. If you would like to do a firmware upgrade
yourself, please contact your dealer.
4 HDBaseT Out Connects to the HDBaseT In port on a VE814AR.
5 Power Jack Connects to the Power Adapter.
No. Component Description
1 RS-232 Port Connects to a computer or control system.
2 IR Out Connects to an IR Transmitter.
3 IR In Connects to an IR Receiver.
4 Ethernet Port Connects to a network device via an RJ-45 cable to
allow for network connectivity.
5 HDMI Out 2 Connects to the HDMI In port on the display device.
1 2 4 3
5
1
2
3
4
5