ATEN VE157, Руководство пользователя

Страница: 21 / 49

13
Chapter 3
Basic Operation
Overview
This chapter describes the Manual Gain Control / EQ switch located on the
front panel of the Remote Unit that adjusts the VGA / DVI / HDMI display to
obtain the best video quality.
Picture Adjustment
The quality of the video signal can decrease with distance. To adjust the video
quality, do the following:
 VE157 – Use the Manual Gain Control switch by turning the knob
clockwise to increase the video signal, or turning the knob counter-
clockwise to decrease the video signal – until you obtain the desired
picture quality.

VE607 / VE807 – Use the EQ switch to adjust the equalization strength
and improve a blinking image.
The Equalization values range from 0-7 where:
 7: strongest equalization

0: weakest equalization