ATEN VE156, Руководство пользователя

Страница: 19 / 37

Hardware Setup
11
Hardware Installation
After mounting the VE156 / VE606 / VE806 Transmitter and Receiver units,
you can conveniently connect the VE156 / VE606 / VE806 decora face plate
installation to your input/output equipment. Refer to the installation diagram
on the following page (the numbers in the diagrams correspond to the steps
below), and do the following:
1. Connect the Video IN Port on the VE156T / VE606T / VE806T
(Transmitter) to the Video OUT port on your video source device.
2. Connect one end of the audio cable to the Audio IN port of the VE156T /
VE606T / VE806T and connect the other end to the Audio OUT port of
the source device.
3. Connect the Video OUT port on the VE156R / VE606R / VE806R
(Receiver) to the Video IN port on your video display device using the
VGA/DVI/HDMI cable that came with your display device.
4. Connect your speakers to the Audio OUT port on the VE156R / VE606R /
VE806R.
5. Connect the Transmitter or Receiver to a power outlet using the provided
terminal block connector / power adapter – see How to Supply Power ,
page 8.
6. Connect one end of the Cat 5e cable to the Line OUT port (VE156T) /
TMDS port (VE606T / VE806T) on the Transmitter unit. Connect the
other end of the Cat 5e cable to the Line IN port (VE156R) / TMDS port
(VE606R / VE806R) on the Receiver unit.
7. (Optional) Use a second Cat 5e cable to connect the Power ports (VE156T
/ VE156R) / DDC ports (VE606T / VE606R / VE806T / VE806R).
Note: 1. A second Cat 5e cable connection is required only if you need to
transmit power to either Transmitter or Receiver.
2. For VE606 / VE806, in addition to the above, a second Cat 5e
cable is only required if you need to use real EDID Bypass and
HDCP key authentication.
8. Power on your source and display devices.