ATEN VanCryst VP3520, Руководство пользователя

Страница: 20 / 89

Chapter 2. Hardware Setup
8
IR Remote Control
To operate the VP3520, insert the supplied IR receiver to the IR receiver port
on the back panel of the VP3520.
No. Buttons Description
1 on / off Used to power on the VP3520 and enable / disable the standby
mode. For details, see
Power LED Indication , page 20.
2 source Press a source button to switch the focused display to the
source.
3 display Press a display button to focus the display.
4 mute Press the button to mute all displays and speakers.
5 functions Press the function pushbuttons to select a pre-configured IR
remote commands to control the connected display.
6 volume up Press the set the volume up.
7 volume down Press to set the volume down.
2 3
4
5
6
7
1