ATEN VanCryst VP3520, Руководство пользователя

Страница: 18 / 89

Chapter 2. Hardware Setup
6
Rear View
No. Component Description
1 cable lock screw for
ATEN LockPro
TM
Universal HDMI cable lock that provides the easiest way to
secure an HDMI cable to most HDMI devices.
2 audio input port Receives a line-in audio source.
3 mic input ports Connects to a microphone. To use the phantom power for
dynamic microphone, set PHANTOM switch to
ON .
4 power socket Receives a power cord to supply power to the VP3520.
5 power switch Enables or disables the power supply to the VP3520.
6 grounding terminal Grounds the VP3520 to prevent damages from power
surge or static electricity.
7 source 1, 2 Connect to a source device at a distance via a Tx device
equipped with an HDBaseT port.
Note: These HDBaseT input ports support PoH (Power
over HDBT)
8 source 3, 4, and 5 Connect to HDMI source devices via HDMI cables.
9 output / Display A Connects to an Rx device which in turn connected to a
display device at a distance.
Note: These HDBaseT output ports support PoH (Power
over HDBT)
HDBaseT output
port
relay port 1 & 2 Connect to the project’s screen to bring the screen up and
down.
10 output / Display B Connects to an HDMI-enabled display device.
HDMI output port
RS-232 port Connects to the display for control via RS-232 serial
commands using a RS-232 terminal block.
IR port Connects to the display for control via IR remote control
using a RS-232 terminal block.
1 3 2
7 8 9 4 5 6 11 12 13 14 10