ATEN VanCryst VM3200, Руководство пользователя

Страница: 120 / 209

VM3200 / VM3250 User Manual
104
Note: If the fans have stopped working or are switched off, they will
appear as follows. The fan module will then need to be replaced
or reset.
Power Status
This section displays the status and percentage used of the Primary and
Redundant Power units.
Serial Settings
Š
Serial Port Mode : Defines the serial communications mode for the
VM3200 / VM3250.
Š RS-232 Configuration Mode : Allows the user to configure VM3200 /
VM3250’s system via RS-232 serial commands.
Š
RS-232 Control Mode : Allows the user to control remote devices that
are connected to VM3200 / VM3250 through its RS-232 channels. To
enable this feature, select the
RS232 Control Mode and configure the
input to output settings. For details, see Channel , page 127.
Note: To enable this feature, make sure to also configure the RS-232
channeling. For details, see
Channel , page 127.
Š RS-422/RS-485 : If you are using RS422/RS485 , define the Serial Port
Address using the drop-down list.
Š Serial Port Address : Defines the serial port address.
Š Baud rate : Defines the baud rate for the serial port.
Streaming Out
You can use the VM3250 to stream live videos out. For detailed information
on setting up and stream out a video source, see
Š Server URL: Enter the URL of the streaming server for which you have
registered.
Š Streaming Key: Enter the streaming key (provided by the server or
platform you have registered).