ATEN VanCryst VE8900, Руководство пользователя

Страница: 47 / 122

Chapter 4. Management
35
Apply / Auto Apply
If you wish to apply settings as you configure them, check Auto Apply .
Alternatively, if you wish to manually apply the settings, uncheck Auto Apply
and use the Apply button. The button will light up to show a change was made.
4 OSD Globally enables or disables panel control of the
VE8900 / VE8950 / VE8952 devices used in
managed video walls. To enable or disable panel
control of VE8900 / VE8950 / VE8952 devices
for a single video wall, use the OSD setting for a
preview window. For details, see
Configuration
Menu in Editing a Preview , page 43.
5 Refresh Refresh / Update the Daisy Chain Status.
6 Auto Apply Check to enable auto apply, where all the
settings are automatically applied to the devices.
7 Profile Schedule Click to enter profile scheduling page. For more
information, please refer to
Setup Profile
Schedules on page 49.
8 System Settings Click to access system settings, including the
general settings, transmitter settings, receiver
settings, firmware update, backup, and restore
settings, and account settings. For more details,
see Chapter 5, System Settings.
9 Log Out Click to log out VE Manager.
10 Source List Lists the display sources and identifies each
source with its corresponding transmitter.
11 Profile Bar Video wall profile for video wall display. For
more information, please refer to
Profile on
page 44.
No. Component Description