Chapter 2. Hardware Setup
8
VE883T Rear View
No.
Component
Description
1
optical port
Plug this port with an SFP+ module.
2
Ethernet channel port
Connects to the source device via an Ethernet cable to
allow the source device to access the network from the
corresponding VE883R. For details, see the installation
illustration in
3
IR port
Receives an IR emitter or receiver.
4
firmware upgrade port
This port is reserved for ATEN Technical Support. If you
would like to do a firmware upgrade yourself, please
contact your dealer.
5
power jack
Receives a power adapter cable.
1
2
3
5
4
