CL1008 / CL1016 User Manual
42
Hotkey Beeper Control
The beeper can be hotkey toggled on and off (see
page 31). To toggle the beeper, key in the following hotkey combination:
1. Invoke
Hotkey
mode (see page 37).
2. Press
[B]
After you press
B
, the beeper toggles on or off. The command line displays
Beeper On
or
Beeper Off
for one second; then the message disappears and you
automatically exit
Hotkey
mode.
Hotkey Summary Table
[Num Lock] + [-]
[Port ID] [Enter] Switches the KVM focus to the computer that
corresponds to that port ID
[T] [n] [Enter]
Sets the
Auto Scan
interval to
n
seconds – where
n
is a number from 1–255.
[A]
Invokes
Auto Scan
mode.
When
Auto Scan
mode is in effect, [P] or left
click pauses auto scanning.
When auto scanning is paused, pressing P or
left clicking again resumes auto scanning.
Note:
Pressing almost any of the typewriter keys
(letters, numbers, Enter, Esc, Spacebar, etc.), will
resume scanning.
[←]
Skips from the current port to the first accessible
port previous to it. (See
for information regarding accessible ports.)
[→]
Skips from the current port to the next accessible
port.
[↑]
Skips from the current port to the last accessible
port of the previous station. If you are at a port on
the first station you cycle backward to the last
accessible port on the last station.
[↓]
Skips from the current port to the first accessible
port of the next station. If you are at a port on the
last station you cycle forward to the first accessible
port on the first station.
[B]
Toggles the beeper on or off.
