ATEN NRGence HV Series, Руководство пользователя, Страница: 37 / 73

27
Chapter 4
LCD/Button Operations
Overview
The unit includes an LCD display with a three-button configuration
interface.
Button Operation
Button Function
on / mute button

Turn on the UPS: Press and hold ON/Mute button for at least 2
seconds to turn on the UPS.

Mute the alarm: After the UPS is turned on in battery mode, press
and hold this button for at least 3 seconds to disable or enable the
alarm system. But it’s not applied to the situations when warnings
or errors occur.

Up key: Press this button to display previous selection in UPS set
-
ting mode.

Switch to UPS self-test mode: Press ON/Mute buttons for 3 sec
-
onds to enter UPS self-testing while in AC mode, ECO mode, or
converter mode.
off / enter button

Turn off the UPS: Press and hold this button at least 2 seconds to
turn off the UPS. UPS will be in standby mode under power normal
or transfer to Bypass mode if the Bypass enable setting by press
-
ing this button.

Confirm selection key: Press this button to confirm selection in
UPS setting mode.
select button

Switch LCD message: Press this button to change the LCD mes
-
sage for input voltage, input frequency, input current, battery volt
-
age, battery current, battery capacity, ambient temperature, output
voltage, output frequency, load current and load percent.

Setting mode: Press and hold this button for 3 seconds to enter
UPS setting mode when Standby and Bypass mode.

Down key: Press this button to display next selection in UPS set
-
ting mode