![ATEN Master View CS-1708 Скачать руководство пользователя страница 30](http://html1.mh-extra.com/html/aten/master-view-cs-1708/master-view-cs-1708_user-manual_2997936030.webp)
CS-1708 / CS-1716 User Manual
22
(Continued from previous page.)
Setting
Function
PORT ID
DISPLAY
MODE
Selects how the Port ID is displayed: the Port Number alone
(
PORT NUMBER
); the Port Name alone (
PORT NAME
); or the
Port Number plus the Port Name (
PORT PORT
NAME
). The default is PORT PORT NAME).
SCAN
DURATION
Determines how long the focus dwells on each port as it cycles
through the selected ports in Auto Scan Mode (see
page 29). Key in a value from 1 - 255 seconds, then press
[Enter]
.
Default is 5 seconds; a setting of 0 disables the Scan function.
SCAN/SKIP
MODE
Selects which computers will be accessed under Auto Scan Mode
(see
, page 29). Choices are:
ALL
- All the Ports which have been set Accessible (see
POWERED ON
- Only those Ports which have been set Accessible
and are Powered On;
QUICK VIEW
- Only those Ports which have been set Accessible
and have been selected as Quick View Ports (see
QUICK VIEW + POWERED ON
- Only those Ports which have
been set Accessible and have been selected as Quick View Ports
and are Powered On. The default is ALL.
Note:
The Quick View choices only show up on the Administrator's
screen, since only he has
Quick View
setting rights (see
, page 25, for details).
SCREEN
BLANKER
If there is no input from the console for the amount of time set with
this function, the screen is blanked. Key in a value from 1 - 30
minutes, then press
[Enter]
. A setting of 0 disables this function.
The default is 0 (disabled).
HOTKEY
COMMAND
MODE
Enables / Disables the Hotkey function (see
page 31) in case there is a conflict with programs running on the
computers.
On
enables the function,
Off
disables it. The default is
On.
HOTKEY
Selects which keys invoke Hotkey Mode (see
[Num Lock] [-]
or
[Ctrl] [F12]
.
The default is [Num Lock] [-].
cs1708-1716.book Page 22 Thursday, July 19, 2007 3:06 PM