ATEN KE6900R, Руководство пользователя

Страница: 121 / 324

103
Chapter 3
OSD Operation
Overview
This chapter provides instructions to configure and operate KE Series devices
using the local On Screen Display (OSD). To configure the network settings
with the OSD, see
Network Configuration
, page 98.
Invoking the OSD
The On Screen Display (OSD) is a keyboard/mouse-driven application on the
receiver used to configure the transmitter and receiver settings. Once the
receiver has discovered the transmitter over a network* or Ethernet cable
connection, you can use the OSD on the receiver to configure the transmitter.
To invoke the OSD, press the OSD pushbutton on the front of the receiver, or
from the keyboard tap the
Scroll Lock key twice. The
OSD
main page will
appear (see , page 104).
To exit the OSD, press [Esc] on the keyboard; click Logout ; tap the Scroll
Lock key twice; or return to the OSD main page and press the OSD pushbutton
on the front of the receiver. The OSD disappears and the computer desktop
screen or the System Login prompt is displayed.
Note: 1. For the Receiver to discover the Transmitter over a network, both
must be on the same subnet of the LAN.
2. To change the OSD hotkeys, see page 119.
3. If the keyboard/mouse won’t work when the OSD is invoked, see
USB Mode
, page 177.
Touch Screen Calibration
If you’re using a touch screen monitor and the OSD appears off center, you can
use the blinking
+
at each corner to adjust the position of the OSD.