ATEN KA8270 Скачать руководство пользователя страница 76

Страница: 76 / 116

KVM over IP Console Station User Manual

Maintenance

The

Maintenance

function is used to upgrade firmware; backup and restore

configuration and account information; Push/pull configurations; send
terminal commands, ping network devices; and restore default values.

Upgrade Main Firmware

As new versions of the firmware become available, they can be downloaded
from our website. Check the website regularly to find the latest information and
packages.

Click “Upgrade Main Firmware” under “Maintenance” in the side menu to
bring out the information page.

To upgrade the main firmware:

1. Gett the newest firmware by downloading the firmware from ATEN’s

website to a computer.

2. Unzip the .zip file for the .csf file and transfer it to a USB flash drive.

Note

: Please use FAT file system formatted USB flash drive(s).

3. Remove the USB flash drive from the computer and insert it to a USB port

of the console station.

4. On the console station firmware page, click “Choose File” and a file

management window will pop-up:

Содержание KA8270





















































































































Результаты поиска

Содержание KA8270

Отзывы:

ATEN KA8270, Руководство пользователя, Страница: 76 / 116

Результаты поиска

Содержание KA8270

Отзывы: