ATEN KA8270, Руководство пользователя

Страница: 67 / 116

Chapter 5. System Configuration
55
Note:
1. If you select View Only , you will be able to see the KVM over IP switch
in the IP Installer’s Device List, but you will not be able to change the IP
address.
2. For security, we strongly recommend that you set this to View Only or
Disable after each use.
IPv4 Settings
 IP Address:
IPv4 is the traditional method of specifying IP addresses. The KVM over
IP Console Station can either have its IP address assigned dynamically
(DHCP), or it can be given a fixed IP address.
 For dynamic IP address assignment, select Obtain IP address
automatically ( default ).
 To specify a fixed IP address, select Set IP address manually and fill in
the fields with values appropriate for your network.
Note:
1. If you choose Obtain IP address automatically , when the console station
starts up it waits to get its IP address from the DHCP server. If it has not
obtained the address after one minute, it automatically reverts to its factory
default IP address (192.168.0.60.)
2. If the switch is on a network that uses DHCP to assign network
addresses, and you need to ascertain its IP address, see
Supported KVM
Switches on page 103 for information.
 DNS Server
 For automatic DNS Server address assignment, select Obtain DNS
Server address automatically .
 To specify the DNS Server address manually, select Set DNS server
address manually , and fill in the addresses for the Preferred and
Alternate DNS servers with values appropriate for your network.
Note: Specifying the Alternate DNS Server address is optional.