ATEN CV190, Руководство пользователя, Страница: 11 / 20

3
Chapter 2
Installation
Installation is simply a matter of plugging in the cables. Refer to the installation
diagram as you perform the steps below:
Note: Make sure all the equipment to be connected is powered off and
properly grounded.
1. Plus the KVM switch end of the converter cable into any available CPU
port on the KVM switch.
For SPHD-15 type switches, plug in the CV190’s single SPHD-15
connector.
2. Plug the other end of the cable into the computer’s USB and DisplayPort
ports.
1. Important safety information regarding the placement of this
device is provided on page 5. Please review it before
proceeding.
2. Make sure that power to all the devices you will be installing has
been turned off. You must unplug the power cords of any
computers that have the Keyboard Power On function.
1
2
SPHD-15 Switch