ATEN CS18208, Руководство пользователя

Страница: 65 / 110

5. Hotkey Operation
55
EDID Mode
To configure an EDID mode for the CS18208 / CS18216, do the following:
1. Invoke HSM with the [Num Lock] + [-] or [Ctrl] + [F12] combination.
2. Press [V] .
3. Key in [1] , or [2] , the Function of [1], and [2] keys is listed in the
following table:
4. Press [Enter] . After pressing [Enter] you automatically exit HSM .
Mouse Emulation Control
The default setting is enabled. To disable, do the following:
1. Invoke HSM with the [Num Lock] + [-] or [Ctrl] + [F12] combination.
2. Press [M] .
This procedure is a toggle. Repeat to enable.
Note: Enable mouse emulation to perform any independent switching of a port
and for Auto Scan Mode or Skip Mode to work.
Key Description
1 Sets the switch to read HDMI
monitor’s EDID (Default)
2 Sets the switch to ATEN default
EDID mode