ATEN CS18208, Руководство пользователя

Страница: 59 / 110

5. Hotkey Operation
49
Select the Active Port
Each KVM port is assigned a port ID (see Port ID Numbering , page 28). You
can directly access any computer on the installation with a hotkey combination
that specifies the port ID of the KVM port that a computer is connected to. To
access a computer using hotkeys:
1. Invoke HSM with the [Num Lock] + [-] or [Ctrl] + [F12] combination.
2. Key in the port ID.
The port ID numbers display on the command line as you key them in. If
you make a mistake, use
[Backspace] to erase the wrong number.
3. Press [Enter] .
After you press [Enter], the KVM focus switches to the designated
computer and you automatically exit HSM.
Note: In HSM, KVM focus will not switch to a port if an invalid switch or
port number is entered. The hotkey command line will continue to
display on the screen until you enter a valid switch and port number
combination, or exit HSM.
Note: The [PN] stands for the computer’s Port ID number (1, 2, 3, or 4). See
Port ID Numbering , page 28 for details. Replace the [PN] with the
appropriate Port ID when entering Hotkey combinations.
Hotkey Action
[PN] [Enter] Brings the KVM , USB hub , and audio focus to the
computer attached to the port corresponding to the
specified Port ID.
[PN] [K] [Enter] Brings only the KVM and audio focus to the computer
attached to the specified port. The USB hub and audio
focus remain where they are.
[PN] [U] [Enter] Brings only the USB hub focus to the computer
attached to the specified port. The KVM and audio
focus remain where they are.