ATEN CS1708i, Руководство пользователя

Страница: 71 / 216

Chapter 5. Logging In
55
The Java Client AP Connection Screen
A description of the Connection Screen is given in the following table:
Item Description
Server List Each time the JavaClient.jar file is run, it searches the User's
local LAN segment for CS1708i / CS1716i, and lists
whichever ones it finds in this box. If you want to connect to
one of these units,
double-click it. (See
Connecting –
Windows Client AP
, page 53 for details.)
Note: 1. The switch will not appear in the list unless its
Enable Device List
configuration parameter has
been enabled.
2. Only units whose Access Port settings for
Program
(see
Service Ports
, page 119) match the number
specified for
Port
in the Server area of this dialog
box appear in the Server List window.
Server This area is used when you want to connect to a CS1708i /
CS1716i at a remote location. You can drop down the IP list
box and select an address from the list. If the address you
want isn't listed, you can key in the target IP address in the IP
field, and its port number in the Port field. (If you don't know
the port number, contact your Administrator.)

When the IP address and Port number have been
specified, click
Connect . (See
Connecting – Windows
Client AP
, page 53 for details.)

When you have finished with your session and come back
to this dialog box, click
Disconnect to end the connection.
Message List Panel Located just to the right of the Server panel, the Message List
Panel lists status messages regarding the connection to the
CS1708i / CS1716i.
Switch to Remote View Once you have been authenticated (see
Connecting –
Windows Client AP
, page 53 for details), this button becomes
active. Click it to switch to the GUI Main Page. The GUI Main
Page is described on page 57.