ATEN CL-1758L, Руководство пользователя, Страница: 47 / 84

4. OSD Operation
33
(Continued from previous page.)
Setting Function
PORT ID
DISPLAY
MODE Selects how the Port ID is displayed: the Port Number alone
(
PORT NUMBER ); the Port Name alone ( PORT NAME ); or the
Port Number plus the Port Name ( PORT PORT
NAME ). The default is PORT PORT NAME).
SCAN
DURATION Determines how long the focus dwells on each port as it cycles
through the selected ports in Auto Scan Mode (see
F7 SCAN ,
p. 37). Key in a value from 1 - 255 seconds, then press [Enter] .
Default is 5 seconds; a setting of 0 disables the Scan function.
SCAN MODE Selects which computers will be accessed under Auto Scan Mode
(see
F7 SCAN , p. 37). Choices are:
ALL - All the Ports which have been set Accessible (see SET
ACCESSIBLE PORTS , p. 36);
QUICK VIEW - Only those Ports which have been set Accessible
and have been selected as Quick View Ports (see SET QUICK
VIEW PORTS , p. 36);
POWERED ON - Only those Ports which have been set Accessible
and are Powered On;
QUICK VIEW + POWERED ON - Only those Ports which have
been set Accessible and have been selected as Quick View Ports
and are Powered On. The default is ALL.
SCREEN
BLANKER If there is no input from the console for the amount of time set with
this function, the screen is blanked. Key in a value from
1 - 30 minutes, then press
[Enter] . A setting of 0 disables this
function. The default is 0 (disabled).
HOTKEY
COMMAND
MODE Enables / Disables the Hotkey Command function. If the hotkey
combinations conflict with programs running on the computers, you
may want to disable hotkey operation by turning Hotkey Command
Mode Off. The default is ON, which allows hotkey operation of the
switch.
cl1758.book Page 33 Thursday, March 30, 2006 3:30 PM