13
Chapter 2
Hardware Setup
Stacking and Rack Mounting
Stacking
The CE624 / CE924 can be placed on any appropriate level surface that can
safely support its weight plus the weight of its attached cables. To place or
stack the CE624 / CE924, remove the backing material from the bottom of the
rubber feet that came with this package, and stick them onto the switch's
bottom panel at the corners, as shown in the diagram, below:
Note:
The unit used in the diagram below is CE924, the procedure for
connecting the CE624 is identical.
1. Important safety information regarding the placement of this
device is provided on page 23. Please review it before
proceeding.
2. Make sure that the power to all devices connected to the
installation are turned off. You must unplug the power cords of
any computers that have the Keyboard Power On function.
