ATEN ATEN VanCryst VM1600A, Руководство пользователя

Страница: 77 / 204

Chapter 3. Front Panel Operation
63
Security Mode
The Security Mode page allows you to configure the VM1600A’s password-
related settings; the
Password page sets the VM1600A to require a password
for local operation after the LCD display times out (default time out: 5 minutes)
or is powered off/on. The
Change Password option allows you to set a new
password for the VM1600A.
To configure the VM1600A’s password settings from the Main Screen, use the
Menu pushbutton to access the Menu page, then press pushbutton 4 to access
the Security Mode page.
Mode
1. To set the VM1600A so that it requires a password for local operation,
press pushbutton 1 in the Security Mode page.
2. To disable security settings, press pushbutton 1 .
3. To require a password after the LCD display times out or is powered off/
on, press pushbutton 2 .
4. To enable a lock screen, press pushbutton 3 . When Lock Screen is enabled,
pressing any pushbutton from the home screen will trigger the following
message:
Please press “Menu” to start.
Note: By default the password requirement is disabled. If the password is
enabled, the LCD display’s default time-out is 5 minutes.
1: Mode
2: Change Password
1: Mode
2: Change Password
1: None
2: Password Enable
3: Lock Screen