ATEN ATEN VanCryst VM1600A, Руководство пользователя

Страница: 164 / 204

Modular Matrix Solution User Manual
150
EDID Mode Command
Extended Display Identification Data (EDID) is data that contains a display's
basic information and is used to communicate with the video source. The EDID
Mode commands allow you to change the EDID setting.
The formula for the EDID command is as follows:
C A C [Enter]
1. For example, for port 06 to use the remix EDID mode, type:
edid a06 remix [Enter]
1. For example, to use Port1 EDID mode for all devices, type:
2. edid a* port1 [Enter]
The following tables show the possible values for the EDID command:
Command Description
edid EDID command
Address Description
a Device address command
(RS-422 and RS-485 only)
Number Description
zz Device address
zz: 01~16 (default is 01)
(RS-422 and RS-485 only)
* All devices
Control Description
port1 Implement the EDID of the connected
display to Port 1, and pass it to the
video source.
remix Implement the EDID of each
connected display according to its
connection when the VM1600A is first
powered on, or immediately after
selecting the Remix option.
default Implements ATEN’s default EDID.
(default)
custom Implements the customized mode as
set in the EDID system settings.
(See
Customized Mode , page 114)