ATEN ALTUSEN PN0108, Руководство пользователя

Страница: 78 / 92

PN0108 User Manual
68
Problem 5:
Although I have enabled Modem Ring Resume , the computers won’t restart.
Solution:
1. Make sure you have enabled Modem Ring Resume in the computer’s BIOS
settings.
2. If Modem Ring Resume has been enabled in the computer’s BIOS, check
your mainboard manual to make sure it supports external modem wakeup.
See BIOS Power Management Settings , page 47, for further details.
3. Modem Ring Resume supports restarting after a normal power down. If the
computer shut down due to a crash or a power failure, you must restart the
computer in order for
Modem Ring Resume to function again.
A workaround for this is to enable System after AC Back (see System after
AC back* , page 39).
We recommend enabling both Modem Ring Resume and System after AC
Back – assuming your computer’s BIOS supports it.
Problem 6:
System after AC Back doesn’t work.
Solution:
Make sure System after AC Back is set to On (not Last State ) in your
computer’s BIOS.
Problem 7:
After I rack mount my PN0108, the cables often come unplugged from the back
of the unit.
Solution:
The connectors used on this device all conform to industry standard
specifications. Nevertheless, if this problem occurs, we recommend using
cable ties and cable bars to safely and securely route the cables. Contact your
rack dealer for the cable routing hardware appropriate for your rack.
pn0108.book Page 68 Friday, December 14, 2007 4:15 PM