ATEN ALTUSEN KM0216, Руководство пользователя

Страница: 52 / 89

KM0216 / KM0432 User Manual
42
F4 ADM
F4 is a Super Administrator and Administrator only function. It allows them to
configure and control the overall operation of the OSD. To change a setting
Double Click it; or use the Up and Down Arrow Keys to move the highlight
bar to it then press
[Enter] .
After you select an item, a submenu with further choices appears. Double Click
the choice you want, or move the Highlight Bar to it then press
[Enter] . An
icon appears before the selected choice to indicate which one it is. The settings
are explained in the following table:
Note: All your setting changes are stored in temporary memory and remain in
effect for the duration of your session. The changes only become
permanent when you Log out of the OSD (see
F8 LOUT , page 47). If
you shut down the KM0216 / KM0432 without first logging out, your
changes are discarded.
(Continues on next page.)
Setting Function
SET
USERNAME
AND
PASSWORD This function is used to set Usernames and Passwords:
1. One Super Administrator, one Administrator, and four User pass-
words can be set.
2. After you key in a name for the Super Administrator, Administrator,
or User, a screen that allows you to key in the username and pass-
word appears. The username and password may be up to 15 char-
acters long, and can consist of any combination of letters and
numbers (A–Z, 0–9).
3. For each individual, key in the Username and Password, then press
[Enter].
4. To modify or delete a previous Username and/or Password, use the
backspace key to erase individual letters or numbers.
SET
LOGOUT
TIMEOUT If there is no input from the console for the amount of time set with this
function, the Operator is automatically logged out. A login is necessary
before the console can be used again.
This enables other Operators to gain access to the computers when
the original Operator is no longer accessing them, but has forgotten to
log out. To set the timeout value, key in a number from 1–180 minutes,
then press [Enter]. If the number is 0 (zero), this function is disabled.
The default is 0 (disabled).
km0216-0432.book Page 42 Wednesday, April 14, 2010 3:17 PM