Appendix C: Additional Information
C-1: Firmware Upgrade Using Xmodem Upgrade
Fig. 111. Xmodem Upgrade.
To upgrade the firmware of WLAN hotspot access gateway using Xmodem Upgrade
over RS232:
1.
Power off the WLAN hotspot access gateway whose firmware will be upgraded.
2. Connect the managing PC and the WLAN hotspot access gateway with an
RS232 Null Modem
cable.
3.
Select the serial port (COM1 or COM2) you use for connecting the device from the
Serial port
drop-down list and click
Connect
.
4.
Chose the folder in which the firmware files reside by click
Browse
.
5.
Power on the WLAN hotspot access gateway and you'll see bootup information.
6. Click
Start
to begin upgrade the firmware of the WLAN hotspot access gateway.
7.
You will be prompted when the upgrade process completes.
Click
Erase Config
to reset the configuration settings of the WLAN hotspot access gateway to default
values.
79
Содержание IWE1200A-G
Страница 1: ...USER S MANUAL...
Страница 14: ...7...
Страница 72: ...Fig 95 Advertisement links settings Fig 96 Advertisement links in action 65...