IDA8 Global-Net User Manual
36
© 2017, ATEÏS, member of PAX ProAV Group
Step 3: Choose the in/output
channel.
Please choose the channel first,
then press [Manual] and press
[ON/OFF] to activate the channel.
See the picture as below,
3.1.1.6
Audio Channel Settings
The IDA8 system supports a max. of up to 48
paging sources to page simultaneously via
Ateis-Net. Users can decide to distribute the
total paging sources either on Ateis Global-
net card or Ateis Local-net card.
Please right click on the IDA8C and open
the [Audio Channel Settings] window, and
then distribute the paging sources. After
that, please proceed [Compile] and [Store]
action to complete this process.
When the number of paging sources you set on the [Audio Channel Settings] window] are more
than the actual number of paging sources in the IDA8 system, the sources which are not included
will fail.
Example 1 (using with Local-Net only):
o
Please adjust the number of paging channel that is using the Ateis Local-Net to a max. of
number.
o
Set the number Global--Net channel as 0 and the Local-Net channel as 48.
Example 2 (using with Global-Net only):
o
Please adjust the number of paging channel that is using the Ateis Global-Net to a max. of
number.
o
Set the number Global-Net channel as 48 and the Local-Net channel as 0.
Example 3 (using both Global-Net and Local-Net):
o
Please calculate the number of the paging channels that are under the Local & Global-Net in
your design configuration. Normally users can set the amount to half of the max. in total.
