Ateis IDA8 Series Скачать руководство пользователя

Страница: 247 / 559

Product Features

247

Save/Cancel/Done buttons

3.2.10.4.2 Setup 1

Under the "Setup 1" and "Setup 2" tabs, you can set how PPM-IT5 connects to the network and performs

functions such as Stream Out, Logic Control, 3rd party control, etc.

3.2.10.4.2.1 Basic Setting

Network:

DHCP:

Enable/disable

the

Dynamic

Host

Configuration Protocol.

IP Address: Click to change its IP to fit your network.

Each TERRACOM device is shipped from the factory

with a default IP address of 192.168.100.1

Subnet Mask: Depend on the LAN where the

Terracom devices are located.

Gateway Server: The IP address of the gateway

server.

DNS: Check the checkbox to enable the DNS server

and type the IP address.

System Time:

Date/Time: Manually set the device time.

NTP Client Service: Once enable this, the NTP Server

IP is needed.

Timezone: The timezone of your Terra devices.

NTP Server IP: The NTP Server IP address.

Location: Click the drop-down list to select the

location and click [Save] button to apply.

Changes in the System Time area will affect

the Scheduler and the Current Time display on the

web page.

Family Status:

Status Notify Service:

Enable/disable server for managing and

monitoring

whether

the

network

support IGMP. If not, TerraServer is

needed to fix the problem. Once

enable Status Notify Service, the

Содержание IDA8 Series
















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание IDA8 Series

Отзывы:

Похожие инструкции для IDA8 Series

Бренды по названию

Популярные бренды

Ateis IDA8 Series, Руководство пользователя

Результаты поиска

Содержание IDA8 Series

Отзывы:

Похожие инструкции для IDA8 Series

Бренды по названию

Популярные бренды