90
© 2019, ATEÏS, member of PAX ProAV Group
5.1.6.1.3.1 Add a DPM-MAIN/DPM-T5/CD-8DF/CD-16DF/CD-T5DF
Name: The name of remote (DPM-MAIN/DPM-T5/CD-8DF/CD-16DF/CD-T5DF/DNM2-ETH/DGL-
MIC).
Device: The type of remote (DPM-MAIN/DPM-T5/CD-8DF/CD-16DF/CD-T5DF/DNM2-ETH/DGL-
MIC).
Remote ID: Set the ID number of remote for a BOUTIQUE system. The max. ID number of remote
is 15.
Device port: Set which remote console port (Port A or Port B) on main controller/secondary unit to
connect to this remotes.
Device mount: Select which main controller/secondary unit is connected to the remote.
AGC enabled: Enable/disable the AGC (Automatic Gain Control) function of microphone, it will
effectively reduce the volume if the signal is strong or raises the volume when it's weak. The input
signal can be increased/decreased to a target level. You can adjust the gain of the source
automatically by setting a target level.
Target gain: The level will be increased up to target level when audio level is above the threshold
value.
Max gain: The maximum gain of AGC function. This function keeps a natural and dynamic audio.
Response time: If the audio input level is continually greater than Noise threshold for this period of
time, the gain operation will be active.
Noise threshold: Enable the AGC function when the audio input level is above this value.
Don't set the level too low otherwise it will hear unexpected sounds such as breathing sounds or
ambient noise.
Release time(s): Set the release time when the volume is under the noise threshold of AGC, and
the gain decreases to 0 dB.
Zone release time(s): Set the time to auto deselect the zones which are selected on DPM-MAIN/
DPM before paging.
Screen saver time(s): Set the time to activate the screen saver on DPM-T5/CD-T5DF.
Paging mode:
o
Normal: The default paging mode. Select the zone button(s) on the LCD panel of DPM-T5/CD-