atecpool SIROCCO AIHP115, Руководство пользователя

Страница: 11 / 27

ATECPOOL SIROCCO HEAT PUMP > User Manual
8
IV. Running Test
1. Inspection Before Running Test
a. Please run an inspection test after completing installation;
b. Before running test, confirm below items and write √ in the block;
● Unit installed correctly □
● Power supply voltage is the same as unit rated voltage □
● Correct piping and wiring □
● Air inlet and outlet ports from the air unit unblocked □
● Drainage and venting are unblocked and no water leaking □
● Leakage protector is working □
● Piping insulation is working □
● Ground wire is connected correctly □
c. All wiring and piping should be connected well and carefully checked, then fill the water
tank with water before power is switched on;
d. Empty all air within pipes and from water tank, then press “on-off” button on control
panel to run the unit at setting temperature;