atecpool SIROCCO AIHP115, Руководство пользователя

Страница: 19 / 27

ATECPOOL SIROCCO HEAT PUMP > User Manual
16
3.2. Troubleshooting
Phenomenon Cause Solution
Unit is not running
1.
Power outage.
2.
Power switch is not connected.
3.
Power switch fuse is burned-out.
4.
Timing is not up.
1.
Please wait for power supply
recovery.
2.
Connect the power switch.
3.
Replace the fuse.
4.
Please wait or cancel the
timing setting.
Unit is not running
after starting up
1.
Compressor protection time interval has not
ended.
2.
Water temperature of the unit does not reach the
water temperature needed to start up.
1.
Please wait patiently for the end
of protection time.
2.
Wait for water temperature to
reach the level needed.
Unit is running
normally, but hot
water temperature
is low
1.
Improper temperature setting
2.
Large hot water consumption
3.
Air inlet port or outlet port of outdoor
machine or indoor machine is blocked
1.
Set up proper temperature
2.
Wait for temperature of hot
water to rise
3.
Clear tuyere obstruction
Unit is running
automatically
Reach timing to start up
Please shutdown manually or cancel
timing if don't need start up