ATD-7020
2 SHELF SERVICE CART
ASSEMBLY INSTRUCTIONS
Service Cart Assembly Instructions:
1.
Slide chrome legs (#2) into square holes cut in tray (#1) until bolt holes are
aligned at top of legs.
2.
Insert bolt (#6) into hole on leg and tray. Fasten nut (#10) using lock washer
(#9) and flat washer(#8), but do not tighten nut completely at this time.
Repeat this procedure on all four corners.
3.
Repeat step 1 with second tray (#1) at bottom of legs.
4.
Repeat step 2 with bottom tray (#1)
5.
Insert casters (#4) into the hole of plastic insert(#5). Note: Insert the two
locking caster (#3) at the same end of the cart.
6.
Now go back and tighten all loose nuts and bolts.
