WARNING:
Always remove the charger from the electric outlet when making adjustments, changing parts,
cleaning or working on the tool.
WARNING:
Care should be taken to arrange the cords and cables so they will not be stepped on, tripped over, or
otherwise subjected to damage or stress.
WARNING:
Never
p
Ʃ
o plug in or operate equipment with
or damaged wires, charger cord or
charger cord plug. Have any defe
or damaged parts replaced immediately by
ed personnel.
WARNING:
Avoid body contact with electrically grounded surfaces. There is an increased risk of electric shock if
your body is grounded.
WARNING:
I
Ō
he work area is not equipped with a permanently installed Ground Fault Circuit Interrupter outlet
(GFCI), use a plug-in GFCI between the charging cord and the power receptacle.
ATD-5922
Warnings:
WARNING:
Lead-acid ba
generate hydrogen gas during normal opera on. More gas is generated when the
is charging. Hydrogen gas is:
1. Explosive
2. Poisonous to breathe
3. Highly ammable
WARNING:
To avoid possible damage that may shorten the unit’s working life, protec
Ʃ
his uni
ƞ
rom direct
sunlight, direct heat, and /or moisture.
WARNING:
This system is designed to be used only on vehicles or boats with 12-volt electrical systems.
WARNING:
This system is not designed to be used as a replacemen
ƞ
or a vehicle
ery.
WARNING:
To avoid an explosion and/or the possibility o
ĩ
eing splashed with
acid:
Never allow the red and black clamps to touch each other or for both to touch the same metal object or any electrically
condu
material for that ma
Only
p
Ʃ
o jump start a vehicle or boa
Ɵ
n a well-
ated area.
Always connec
Ʃ
he red (+) clamp to the
ve (+) ba
terminal
Do not connec
Ʃ
he black (-) clamp to the ne
(-)
ery terminal.
Connec
Ʃ
he black (-) clamp to a non-moving metal part on the engine no
Ʃ
o the nega ve (-) ba
terminal.
