FEATURES
♦
Audible click and/or impulse when torque setting is
reached.
♦
+/- 4% clockwise accuracy between 20% and 100% of
range. Complies with:
−
American Standard ANSI/ASME B107.14M
−
International Standard ISO 6789
♦
Large easy to read torque scale.
♦
Ball bearing mechanism provides extended calibration
accuracy.
♦
Anodized aluminum handle with no-slip diamond knurl.
♦
Detent style adjustment locking prevents accidental
change of torque setting.
♦
Chrome plated, hardened steel body.
♦
Factory calibration tape supplied with each tool.
♦
Packaged in protective blow molded storage case.
SUGGESTIONS
Proper use of this professional torque wrench will give you
complete satisfaction in its performance and reliability.
Following are some helpful tips:
1. Accuracy is assured by gripping the wrench properly.
Grasp the GRIP, not the SHAFT, and pull smoothly.
2. Each torque wrench is lubricated before leaving the factory.
If it has not been used for some time, it should be operated
several times to re-distribute the lubricant within the working
mechanism.
3. Never attempt to turn the KNOB when the KNOB is in the
"LOCK" position.
4. Never set for higher or lower torque values than those
indicated on your wrench.
5. For greater accuracy, clean all thread surfaces and remove
any burrs on the fasteners being used.
6.
WARNING
-never use your torque wrench to apply more
torque than its rated capacity.
7. It is not necessary to return this wrench to its lowest
calibrated value after use unless it is to be stored for an
extended period of time.
DO NOT OVERTORQUE
CERTIFICATION
This torque wrench was calibrated prior to shipment from the
factory within tolerance limits of +/- 4% clockwise (right-handed)
accuracy of upper 80% of range
LIMITED WARRANTY
Until one year from the date of purchase, we will repair any
defect in material or workmanship free of charge. Improper use
of these products, including but not limited to the application of
excessive force, will affect performance and may result in
injury. The warranty does not apply to wrenches which do not
function properly or within specified accuracy because of wear,
improper or unreasonable use, damage not resulting from
defect or malfunction, or which have been altered. Calibration is
warranted for 90 days.
This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state.
For repair or calibration send wrench, postage prepaid, to:
ATG Torque Repair
3000 West Kingsley Road
Garland, TX 75041
972-864-6762
REVISED/PRINTED IN USA FEB 2011 FORM CT600-61D
ATD-109
MICROMETER
ADJUSTING
TORQUE
WRENCH
OPERATING
INSTRUCTIONS
Содержание ATD-109
Страница 3: ...ATD 109...
