AT-320 H323 Phone User Manual (V1.39)
31
This command used to set how IP phone log in gatekeeper. X is ranged
from 0 through 6: 0: use phone number as E.164 and H323 ID to login the
GK; 1: use phone number as E.164 and designated H323 ID by set
account
XXX
command; 2:use support automated negotiate about MD5 or CAT
authentication system.3:use MD5 authentication account and pin;4: use CAT
authentication account and pin; 5: use SHA1 authentication account and pin.
set dtmf X
Set DTMF relay type. X is ranged form 0 through 3: 0:control string
1:inband audio 2: signal keypad 3:rfc 2833.
set dtmf payload X
When
dtmf X
select 3(
rfc 2833)
.This parameter can be used indicating type
of RTP payload type. The value can be use integer 96-101.
set dialplan X
Enable/disable dial plan and dial number. Parameter X ranged from 0
through 4: 0: disable dial plan; 1: enable dial plan; 2: use dial number; 3: use
179XX service.;4: use hotline function.
set dialnumber XX
When
set dialplan
value
set as 2, please use this command to set
dial
number.
For example, with eTalk card used, please set it as 00. When
set
dialplan
value
set as 4, please use this command to set
hotline number.
set dddcode XX
Set the area code when set
dialplan
value set as
1
or
2
. For example, the area
