AT-320 H323 Phone User Manual (V1.39)
29
transferring the voice and signal by router; 3: use this value with Innopath
private system used; 5: use this value with vida private system used; 6: aivgr
use this value with aivgr private system used; 7: use this value with Eproxy
private system used.
set nataddr XXXXX
Set IP address of NAT device wan port or URI of free assistant service (Such
as
www.showmyip.com
etc.) in Internet.
NOTE
The free service list of Internet www.ip-calculator.com; www.ipchicken.com;
www.ipchicken.com;www.showmyip.com;www.whatismyip.com;
www.myipaddress.com; www.whatismyipaddress.com; ip.sbbs.net;
www.whatismyipaddress.net;checkip.dyndns.org
set natttl XX
Set NAT TTL XX is an integer between 10 and 65535 sec. default value is
20 sec.
set phonenumber XXXXXXXX
Set a phone number of AT-320 IP phone . Value xxxxx must be an Arabic
numeral and no longer than 16 characters.
set account XXXXXX
While calling card is set, set account of chosen card; while
local type
is set
use authentication type, set user ID; while
set
localtype
is set as 1, set H323
ID.
set pin XXXXXXXXXX
While calling card is set, set password of chosen card; while
local type
is set
