AT-320 H323 Phone User Manual (V1.39)
26
Command
set
Syntax description: set keywords value
Usage:
Used to configure password and other running parameters of AT-320 IP
phone.
Detailed description:
set iptype X
Set how IP phone gets relevant network parameters. X ranged from 0
through 3: 0: authorize users set IP address, subnet mask and router IP
address of IP phone manually; 1: use DHCP mode. With this system, your
LAN or router automatically assigns all the required network parameters to
any device connected to it when the device log on. AT-320 IP phone is
shipped from the factory with DHCP on. So, if your LAN or router is
configured to use DHCP addressing, the IP phone’s LAN parameters will
automatically be configured as soon as it is connected to the LAN or router
and powered up; 2: use PPPoE mode. Those ADSL and Cable Modem users
please select this item for it is a protocol especially designed for them. With
this system, ADSL ISP automatically assigns all the required IP parameters
to any device connected to it when the device log on; 3: use modem mode.
Those who use IP phone with modem, please set the value as 3.
set pppid XXX
With
iptype
set as
2
, use this command to set ADSL ID; with
iptype
set as
3
,
