AG-110 SIP Gateway User Manual
2.3
SIP
2.3.1
SIP server Configuration
1. Primary Server:
Primary Server, AG-110 will auto switch to
Secondary server if primary server is unavailable.
2. Secondary Server: secondary server (back up function)
3. Address:
SIP server IP address
4. Port:
SIP server port
，
the well know port is 5060
5. Domain Name:
server domain
6. Send Registration Request with Expire Time
：
Register TTL (unit: seconds).
Indicate the register period, if AG-110 always log off after some time
，
please
set this time to a lower value.
7. Outbound Proxy IP: Outbound Proxy server IP address
8. Outbound Proxy Port: Outbound Proxy server port
RTP port Number Setting:
RTP local port, the minimum value is 4
NAT Traversal
1.
NONE:
disable
NAT
traversal
2.
UPnP:
use
UPnP
，
need the support of upper gateway
3. Stun Server IP:
Fill in your stun server IP when using stun method
4. Stun Server Port:
Fill in stun server port
Gateway Settings
1. Dial Plan:
please refer to dial_plan
2. # use as a quick dial function: the number will send immediately after you
press the # button
Page 11 of 37
