41
Telephone settings
Handset and telephone base settings
Set date and time
The answering system announces the day and time of each message prior
to playing it. Before using the answering system, set the date and time as
follows. If you subscribe to caller ID service, the day, month and time are set
automatically with each incoming call. If you do not want to set the date and
time automatically with caller ID information, turn this feature off (see
Use
caller ID to automatically set date and time
on page 46). However, the year
must be correct so that the day of the week can be calculated from the caller
ID information.
After handset registration or a power failure, the handset or telephone base will
prompt you to set the date and time.
To set the date and time manually:
1. Press
MENU
in idle mode.
2. Press
CID
or
DIR
to highlight
Set date/time
, then press
SELECT
.
3. Press
CID
or
DIR
to select the month, then press
NEXT
, or
enter the 2-digit number using the dialing keys.
4. Press
CID
or
DIR
to select the day, then press
NEXT
, or
enter the 2-digit number using the dialing keys.
5. Press
CID
or
DIR
to select the year, or enter the 2-digit
number using the dialing keys, then press
NEXT
to move on
to set the time.
6. Press
CID
or
DIR
to select the hour, then press
SAVE
, or
enter the 2-digit number using the dialing keys.
7. Press
CID
or
DIR
to select the minute, then press
SAVE
,
or enter the 2-digit number using the dialing keys.
8. Press
CID
or
DIR
to highlight
AM
or
PM
, or press
2
for
AM
or
7
for
PM
, then press
SAVE
to
confirm
. You hear a
confirmation tone and the screen returns to the previous
menu.
Note:
If the date and time are not set when a message is recorded, the system announces, “
Time and day not set,
”
before each message plays.
SET DATE
06/30/17
MM/DD/YY
BACK
NEXT
SET TIME
05:41 PM
BACK
SAVE
SET TIME
05:41PM
BACK SAVE
SET DATE
06/30/17
MM/DD/YY
BACK NEXT