![AT&T TL8900 Скачать руководство пользователя страница 33](http://html1.mh-extra.com/html/atandt/tl8900/tl8900_user-manual_2994671033.webp)
27
Operation
Headset ringer
The headset charger and headset do not have external ringers.
When you receive calls, the telephone and the headset earpiece
rings.
To change the volume of the earpiece ringer:
X
Slide the volume switch at the top of the headset towards
VOL+
or
VOL-
when the headset is not in use.
To turn off the earpiece ringer:
X
Slide the volume switch at the top of the headset towards
VOL-
until you hear two beeps when the headset is not in use.
Temporary ringer silencing
Press
MUTE
to temporarily silence the ringer in the headset
earpiece. This silences the ringer without disconnecting the call.
The next incoming call rings normally at the preset volume.
Call waiting
If you subscribe to call waiting service offered by your telephone
service provider, and someone calls you while you are already on
a call, you hear a call waiting alert tone.
X
Press down the
FLASH
switch at
the top of the headset to put your
current call on hold and answer
the new call.
X
Press down the
FLASH
switch
again at any time to switch back
and forth between calls.
Headset operation