11
Plug the large end
of the USB cable
into a USB port on
your computer.
•
Plug the small end of the
USB cable into the port
labeled
on the right
side of the headset base.
•
A DSL filter (not included) is required if you have
DSL high-speed Internet service. The DSL filter
must be plugged into a telephone wall jack.
Use the attached
fastener to
bundle all line
cords neatly.
•
Telephone
line cord
Plug the
other end
of the
telephone
line cord
into the
telephone
wall jack or
a DSL filter.
•
Plug one end of
the telephone line
cord into the
TEL
WALL JACK
(red
dot) at the back of
the headset base.
•
Headset base installation
Option 3: Connect the headset to your computer
Connect the headset base to your computer using the
USB cable provided for VoIP calls. Plug the USB cable as
shown below. Wait for your computer to indicate that it has
recognized the headset.
Install the
AT&T Softphone Call Manager
using the
CD-ROM
provided in the package. You may also visit
www.telephones.att.com/downloads
to download
and install the software. For installation and operation
instructions of the software, refer to the
Installation and
Operation Guide
which can also be found in the
CD-ROM
provided or the web site stated above.
1.
.