AT&T OneVision DEFINITY G3 Guide, Инструкция по установке и подключению, Страница: 193 / 287

Issue 2 April 1996
9-13
Proxy Agent Administration
To Change the User Interface
To Change the User
Interface
Introduction The Change User-Interface screen lets you:
■
Change screen colors (if your PC, system console, or
terminal has color capacity)
■
Specify if you want a beep tone for operational errors
When to use Typically, you use this screen only when you set up the Proxy
Agent for the first time. Even then, changing the default values is
more a matter of preference than necessity.
Alternate
access You can access the user-interface fields from the console when
log ged in as the Proxy Agent system administrator (g3maadm).
User
interface
options The Change User-Interface screen displays two Configurations
Options fields that allow you to set the user-interface options. The
following table describes these fields.